;
;----------------------------------------------------------------------------------------------------------------------
; Modem Driver For RCS ECCOM BASIS
; Radio Communication Systems
; ver 1.0
;
; Copyright (c) 2004, RCS 
;----------------------------------------------------------------------------------------------------------------------
;


[Version]
LayoutFile=ECCOM_BASIS.inf
Signature="$CHICAGO$"
Class=Modem
Provider=%Mfg%
DriverVer=07/06/2004

[Manufacturer]
; The string below will appear in the Install New Modem wizard's list of manufacturers
%Mfg% = Models

[Models]
; This list will appear in the Install New Modem wizard's list of modems
%Modem101% = Modem101,  ECCOM BASIS GPRS MODEM     ; "ECCOM BASIS (FAX/CSD/GPRS4)"
%Modem102% = Modem102,  ECCOM BASIS FAX            ; "ECCOM BASIS (FAX/CSD/GPRS4)"

[Strings]
; This section lists strings that are used by the Modems control panel applet
; and the Install New Modem wizard.
Mfg    = "ECCOM BASIS GSM GATEWAY"

Modem101 = "ECCOM BASIS (GPRS MODEM 115200 bps)"
Modem102 = "ECCOM BASIS (FAX 19200 bps)"


[Modem101.ntx86]
AddReg=W2KPat.AddReg, ECCOM_GSM_Ini, External, VerboseResultCodes, GSM_PROTOCOL1, FAXCLASS, BASIS_GPRS.AddReg

[Modem101]
AddReg=               ECCOM_GSM_Ini, External, VerboseResultCodes, GSM_PROTOCOL1, FAXCLASS, BASIS_GPRS.AddReg

[Modem102.ntx86]
AddReg=W2KPat.AddReg, ECCOM_GSM_Ini, External, VerboseResultCodes, GSM_PROTOCOL1, FAXCLASS, BASIS_FAX.AddReg

[Modem102]
AddReg=               ECCOM_GSM_Ini, External, VerboseResultCodes, GSM_PROTOCOL1, FAXCLASS, BASIS_FAX.AddReg


[All]

HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR, Init,      1,, "AT&F&D2&C1E0V1S0=0<cr>"
HKR, Monitor,   1,, "ATS0=0<cr>"
HKR, Monitor,   2,, "None"
HKR, Hangup,    1,, "ATH<cr>"
HKR, Answer,    1,, "ATA<cr>"
HKR,, Reset,, "AT&F<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
;HKR, Settings, FlowControl_Off,,  "\Q0"
;HKR, Settings, FlowControl_Hard,, "\Q3"
;HKR, Settings, FlowControl_Soft,, "\Q1"
;HKR, Settings, CallSetupFailTimer,, "S7=<#>"



[ECCOM_GSM_Ini]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR, Init,      1,, "AT<cr>AT<cr>AT<cr>AT<cr>"
HKR, Init,      2,, "AT&F&D2&C1E0V1S0=0<cr>"
HKR, Monitor,   1,, "ATS0=0<cr>"
HKR, Monitor,   2,, "None"
HKR, Hangup,    1,, "ATH<cr>"
HKR, Answer,    1,, "ATA<cr>"
HKR,, Reset,, "AT&F<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, ""
HKR, Settings, Pulse,, "P"
HKR, Settings, Tone,, "T"
;HKR, Settings, FlowControl_Off,,  "\Q0"
;HKR, Settings, FlowControl_Hard,, "\Q3"
;HKR, Settings, FlowControl_Soft,, "\Q1"
;HKR, Settings, CallSetupFailTimer,, "S7=<#>"


; Decicetype 00:serial, 01:extern, 02:intern, 03: pc-card, 04:parallel
[SERIAL]
HKR,, DeviceType, 1, 00
[EXTERNAL]
HKR,, DeviceType, 1, 01


[GSM_PROTOCOL1]
HKR, Protocol\GSM\ANALOG_RLP, 1,,"AT+CBST=0,0,1<cr>"
HKR, Protocol\GSM\V110_2DOT4K, 1,,"AT+CBST=68,0,1<cr>"
HKR, Protocol\GSM\V110_4DOT8K, 1,,"AT+CBST=70,0,1<cr>"
HKR, Protocol\GSM\V110_9DOT6K, 1,,"AT+CBST=71,0,1<cr>"
HKR, Protocol\GSM\V110_14DOT4K, 1,,"AT+CBST=75,0,1<cr>"
HKR, Protocol\GSM\GPRS, 1,,"AT<cr>"


[FAXCLASS]
HKR, Fax, ResetCommand,, "ATE0V1Q0"
HKR, Fax, HighestSendSpeed,,14400
HKR,, FClass, 1, 0B,00,00,00
;HKR, Fax, Class1DTESpeed,, "AUTO"
HKR, Fax, FixModemClass,, "2"
HKR, Fax, FixSerialSpeed,,"57600"
HKR, Fax, SerialSpeedInit,, "57600"
HKR, Fax\Class1\AdaptiveAnswer, SerialSpeedFaxDetect,, "57600"


HKR,Fax\Class2\AdaptiveAnswer\AnswerCommand,1,,"AT"
HKR,Fax\Class2\AdaptiveAnswer\AnswerCommand,2,,"AT"
HKR,Fax\Class2\AdaptiveAnswer\AnswerCommand,3,,"AT+FCLASS=2"
HKR,Fax\Class2\AdaptiveAnswer\AnswerCommand,4,,"ATA"

HKR,Fax\Class2\AdaptiveAnswer,ModemResponseFaxDetect,,"FAX"
HKR,Fax\Class2\AdaptiveAnswer,ModemResponseFaxConnect,,"CONNECT"
HKR,Fax\Class2\AdaptiveAnswer,ModemResponseDataDetect,,"DATA"
HKR,Fax\Class2\AdaptiveAnswer,ModemResponseDataConnect,,"CONNECT"




[VerboseResultCodes]
; OK
HKR, Responses, "OK<cr><lf>",          1, 00, 00, 00,00,00,00, 00,00,00,00
;HKR, Responses, "<lf>OK<cr><lf>",      1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>OK<cr><lf>",  1, 00, 00, 00,00,00,00, 00,00,00,00
; RING
HKR, Responses, "<cr><lf>RING<cr><lf>",        1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+CRING: FAX<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+CRING: REL ASYNC<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+CRING: VOICE<cr><lf>", 1, 08, 00, 00,00,00,00, 00,00,00,00
; ERROR
HKR, Responses, "<cr><lf>ERROR<cr><lf>",       1, 03, 00, 00,00,00,00, 00,00,00,00
; No CARRIER
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>",  1, 04, 00, 00,00,00,00, 00,00,00,00
; NO DIALTONE
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
; BUSY
HKR, Responses, "<cr><lf>BUSY<cr><lf>",        1, 06, 00, 00,00,00,00, 00,00,00,00
; NO ANSWER
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>",   1, 07, 00, 00,00,00,00, 00,00,00,00
; CONNECT
HKR, Responses, "<cr><lf>CONNECT<cr><lf>",     1, 02, 00, 00,00,00,00, 00,00,00,00
; OK
HKR, Responses, "VCHAN<cr><lf>OK<cr><lf>",                         1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "DIRECT<cr><lf>OK<cr><lf>",                        1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "+CPAS: 0<cr><lf>OK<cr><lf>",                  1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+CPAS: 0<cr><lf>OK<cr><lf>",              1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>+CPAS: 0<cr><lf><cr><lf>OK<cr><lf>",      1, 00, 00, 00,00,00,00, 00,00,00,00
; BUSY
HKR, Responses, "+CPAS: 3<cr><lf>OK<cr><lf>",      1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "+CPAS: 4<cr><lf>OK<cr><lf>",      1, 06, 00, 00,00,00,00, 00,00,00,00

HKR, Responses, "0<cr>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "1<cr>", 1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "2<cr>", 1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "3<cr>", 1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "4<cr>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "6<cr>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "7<cr>", 1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "8<cr>", 1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "10<cr>", 1, 02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "30<cr>", 1, 02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "32<cr>", 1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "47<cr>", 1, 02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "48<cr>", 1, 02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "49<cr>", 1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "33<cr>", 1, 02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "50<cr>", 1, 02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>",         1, 02, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 2400<cr><lf>",    1, 02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 4800<cr><lf>",    1, 02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 9600<cr><lf>",    1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 14400<cr><lf>",   1, 02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 16800<cr><lf>",   1, 02, 00, A0,41,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 19200<cr><lf>",   1, 02, 00, 00,4B,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 21600<cr><lf>",   1, 02, 00, 60,54,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 24000<cr><lf>",   1, 02, 00, C0,5D,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 26400<cr><lf>",   1, 02, 00, 20,67,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 28800<cr><lf>",   1, 02, 00, 80,70,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 38400<cr><lf>",   1, 02, 00, 00,96,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 57600<cr><lf>",   1, 02, 00, 00,E1,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 115200<cr><lf>",  1, 02, 00, 00,C2,01,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 2400/RLP<cr><lf>",    1, 02, 00, 60,09,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 4800/RLP<cr><lf>",    1, 02, 00, C0,12,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 9600/RLP<cr><lf>",    1, 02, 00, 80,25,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 14400/RLP<cr><lf>",   1, 02, 00, 40,38,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 16800/RLP<cr><lf>",   1, 02, 00, A0,41,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 19200/RLP<cr><lf>",   1, 02, 00, 00,4B,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 21600/RLP<cr><lf>",   1, 02, 00, 60,54,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 24000/RLP<cr><lf>",   1, 02, 00, C0,5D,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 26400/RLP<cr><lf>",   1, 02, 00, 20,67,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 28800/RLP<cr><lf>",   1, 02, 00, 80,70,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 38400/RLP<cr><lf>",   1, 02, 00, 00,96,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 57600/RLP<cr><lf>",   1, 02, 00, 00,E1,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 115200/RLP<cr><lf>",  1, 02, 00, 00,C2,01,00, 00,00,00,00



[BASIS_GPRS.AddReg]
; max. serial speed 115200; defaultspeed 115200
HKR,, Properties, 1, 00,00,00,00, 3C,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,00,00,00, 00,C2,01,00, 00,C2,01,00
HKR,, ConfigDelay, 1, b8,0b,00,00 
HKR,, DCB, 1, 1C,00,00,00, 00,C2,01,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00


[BASIS_FAX.AddReg]
; max. serial speed 115200; defaultspeed 19200
HKR,, Properties, 1, 00,00,00,00, 3C,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 30,00,00,00, 00,4B,00,00, 00,4B,00,00
HKR,, ConfigDelay, 1, b8,0b,00,00 
HKR,, DCB, 1, 1C,00,00,00, 00,4B,00,00, 15,20,00,00, 00,00, 0a,00, 0a,00, 08, 00, 00, 11, 13, 00, 00, 00



;Indicates the number of Configure-Request packets sent without receiving a valid Configure-Ack, Configure-Nak
;or Configure-Reject before assuming that the peer is unable to respond
[W2KPat.AddReg]
HKLM,"SYSTEM\CurrentControlSet\Services\RasMan\PPP",MaxConfigure,0x00010001,50